Go Brushless TM

Electric Flight Shop

01293 406634

5% Off All Online Orders

CONTACT

VIEW BASKET

Quantity: Total:

 

 

<BACK

 

 

HOME

ARTF AIRCRAFT 

BATTERIES 

HI MODEL LiPOs 

BATTERIES ZIPPY LiPOs

BATTERY LEADS

Brushless Motors

Chargers & Balancers

CONNECTORS

ESC's

EXT LEADS

HEAT SHRINK

Prop Adapters

PROPS & SPINNERS

RECEIVERS

SERVOS

WATT METER

Zippy Lipos Back in stock

 

 

 

HiModel 100A / 120A 2-12S Electric Brushless Speed Control Type Professional-100A-HV

 

Specifications

Type: Professional-100A-HV

● Output: Continuous 100A, Burst 120A up to 10 Secs.

● Input Voltage: 2-12 cells lithium battery or 5-36 cells NiCd/NIMh battery

● BEC (Battery Elimination Circuit) Output None

● Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)

● Size 55mm x 78mm x 15mm(width x length x height)

● Weight: 125g

 

Features

The Professional-100A-HV supports 2-12S Li-poly battery pack or 5-36 cells NiCd/NiMH battery pack. It is a good choice for big RC aircraft and helicopter models.

● Extreme low resistance PCB used on power output section, the whole ESC has super current endurance capability.

● Military standard capacitor with extreme low resistance used on voltage input section, this will increase the ability to prevent unwanted RF Noise/ Interference.

● Protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

● 3 startup modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopter models.

● Throttle range can be configured, fully compatible with all market available transmitters.

● Smooth and accurate speed control, excellent throttle linearity.

● Highest motor speed supported: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).

● Program Card in a very small size can be purchased additionally for easily programming the ESC on the field.

 

 

1 Safety Arming Feature: Regardless of the Throttle Stick position, the motor will not spin when the battery is connected. This will prevent injury.

2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

3 Programmable Items:

 

●Brake Settings, brake enabled / brake disabled, default is brake disabled

●Battery Type, Li-xx (Li-ion or Li-poly) / Ni-xx (NiMh or Nicd) default is Li-xx.

●Low Voltage Protection Mode (Cutoff Mode) power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold (Cutoff Threshold) low / medium / high, default is medium cutoff voltage.

 

1) For Li-xx battery, number of battery cells are judged automatically, low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*3=8.25V.

2) For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage. 

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

 

Advantages

1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

2 Extremely low resistance, super current endurance.

3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

4 Compatible with Program Card.

 

£

Add to Basket