| Go Brushless TM |
Electric Flight Shop |
01293 406634 |
|
|
|
|||
|
|
Quantity: Total: |
||
|
|
|
<BACK |
|
|
|||||||||||||||||
|
HiModel Professional Series 6A / 8A Electric Brushless Speed Control Type Professional-6A
Specification Type: Professional-6A Output: Continues 6A, Burst 8A up to 10 Secs. Input Voltage: 2 – 3s Lipo or 5 -9 cells NiCd/NiMH BEC (Battery Elimination Circuit) Output: linear mode BEC 0.8A Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) Size: 12mmx24mmx6mm(width*length*height) Weight: 6g
Features 1. Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened. 2. Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters. 3. Programmable Items: ●Brake Settings: brake enabled / brake disabled, default is brake disabled ●Battery Type: Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx. ●Low Voltage Protection Mode(Cutoff Mode) : power reducing / power cutoff, default is power reducing. ●Low Voltage Protection Threshold(Cutoff Threshold) : low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery,number of battery cells are judged automatically,low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V. 2) For Ni-xx battery, low / medium / high cutoff voltages are 0/45%/60% of the startup voltage. (0% means the low voltage cutoff function is disabled). ●Startup mode: normal / soft / super-soft, default is normal startup. ●Timing: low / medium / high, default is medium timing. 4. Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection. Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise
£
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||