|
The new "Watts Up" RC battery Watt meter from
RC Electronics measures and calculates all the electrical parameters you
need to get high performance from your R/C cars or planes. It is an
essential tool for increasing the performance and safety of your
electric-powered R/C model. With the best balance of specifications and
features on the market, you can stop guessing and start knowing "Watts
Up" with your performance!
Why do I need a watt meter? The "Watts Up"
watt meter helps you:
* Predict model
airplane flight time
* Ensure peak currents are safe for motor, wiring and connectors
* Check battery health and whether battery should be retired
* Evaluate R/C battery charging efficiency
* Verify that the minimum voltage while operating is within
specifications
* Choose the best propeller or gearing and the most efficient motor
* Check for wiring and connector power losses
* Measure power and energy consumption of ANY device with a battery
Measures energy (Wh), charge (Ah), power (W),
current (A) and voltage (V)
Connector to use a receiver battery for measurement down to 0 V
Captures current peaks and voltage minimums(droops)
Accurate & precise - 0.01 A current and 0.01 V voltage resolutions
Rugged - handles 50 A continuous and 100 A peak at 60 V
14 ga., 7 x 37 stranded, high temp silicone rubber insulated wire
without connectors
Small & Light: 2.8" long x 1.7" wide x 0.83" thick (70 mm x 44 mm x 21
mm), 2.5 oz.
Acts like a wire so doesn't affect models performance. Precision current
sensing resistor, with only 0.001 Ohm resistance and circuitry only
draws 0.007 Amps
Uses DSP to increase ADC resolution and differential measurement
amplifiers to increase noise immunity
Factory calibration stores constants in EEPROM to compensate for
component tolerances
No PC necessary.
One Year Warranty
Complete User Manual
Made in USA to ISO 9001 standards
|
